Foxwell NT630 Plus is a professional ABS&Airbag reset tool, which also supports SAS calibration, live data, I/M readiness, freeze frame data, read & clear codes, etc.
If there was an airbag warning light on your dashboard of the vehicle, using NT630 Plus to reset it can solve the problem.
1. Go to read airbag codes: Airbag-ACSM crash safety module >> Read codes
2. Solve the problem according to fault codes
3. Clear airbag codes >> Yes
Reset airbag light successfully, waning light has gone!
Go to “Brake bleeding procedure”, follow the instructions on the screen to perform ABS bleeding:
Pre-bleeding routine for rear axle brake circuit.
Press brake pedal as far as it will go every 3s.
The routine takes approx 15s…
SAS >> Start-Up active steering
Follow the instructions to calibrate:
Start the engine so that the wheels turn easily with the steering servo!
The engine may only be switched off if the motor position angle was successfully calibrated.
Start steering from full lock to full lock after pressing “Continue”.
The test procedure starts after the “Continue” has been pressed.
Including system status, read codes, erase codes, live data, freeze frame, I/M readiness, on-board monitor test, and component test.
You can check the real-time data of the wheel speed sensor here.
Foxwell NT630 Plus Reset Tool features wide applicability & free update, which helps to save more money on car care and repair.